In the above photos the muzzle direction is to the right
The most rugged, foolproof scope mount ever designed for the 1911 Auto. Attaches to the dust cover; places the scope forward, over the top of the slide for improved balance and faster sight or red dot alignment. Lightweight, rugged mount won't flex , even when used with major power factor loads. Enhances reliability, does not interfere with ejection. Clearance cut for Colt, Enhanced Slides. Includes installation instructions and Allen mounting screws.
Accepts Weaver and Picatinny style rings. 4-1/2" in length, 6061 T-6 Hardened Aluminum, silver or black, matte anodized finish, weighs 2 ounces. Fits 1911 Auto and clones, Government length frames. Can be easily adapted to wider frames with standard length dust covers.
*Installation of this scope mount requires drilling and tapping of frame.
It also requires removing material from the front of the slide stop.
Rounding the slide stop off even with the cross pin.
Please ask questions before purchasing this mount. We do not suggest amateur installation. Depending on your pistol, ejection and extraction adjustments may need to be made.
| SM3 | Colt 1911 Weaver Style - Silver | $99.95 |
Add To Cart
|
| SM3B | Colt 1911 Weaver Style - Black | $99.95 |
Add To Cart
|
| View Cart |
This is the fixture we have been selling and using in our shop since 1989. Accurately locates the hole locations on the standard 1911 frame for our hole pattern. We suggest using a drill press to drill the holes but we have had customers tell us they simply used a hand drill. The drill fixture is made from half hard 4140 tool steel and should give years of service. The slightly larger hole under the standard hole pattern is a tap guide hole so you can tap perfectly straight holes. This fixture can be used for mounting all of our 1911 mounts, SM3, GPSM.
DF-1911
1911 Scope Mount Drill Fixture
1911 Scope Mount Drill Fixture
(If purchased with any 1911 mount)
| DF-1911 | 1911 Scope Mount Drill Fixture | DISCONTINUED | |
|
1911 Scope Mount Drill Fixture (If purchased with any 1911 mount) |
DISCONTINUED | ||
| View Cart |
A lower cost alternative to the SM3. Same, rugged, no-flex design for the 1911 but because the side vents are left out, machining costs are lower. An excellent choice for pin shooters, Bullseye competitors or any shooter that wants to enhance their 1911 Auto's performance without spending a lot of money. Clearance cut for Colt, Enhanced Slides Includes installation instructions and Allen mounting screws.
Accepts Weaver and Picatinny style rings. 4-1/2" in length, 6061 T-6 Hardened Aluminum, silver and black, matte anodized finish, weighs 2 ounces.
Fits 1911 Auto and clones, Government length frames.
Can be easily adapted to wider frames with standard length dust covers.
*All of the above instructions and warnings apply
GPSM
General Purpose 1911 Mount - Silver
GPSMB
General Purpose 1911 Mount - Black
| GPSM | General Purpose 1911 Mount - Silver | DISCONTUNED | |
| GPSMB | General Purpose 1911 Mount - Black | DISCONTUNED | |
| GPSMNH | General Purpose 1911 Mount - Silver (no mounting holes) | $79.95 |
Add To Cart
|
| View Cart |
